1. die Lenkerhälften kommen 1 1/2 " näher zum Fahrer

2. verstärkte/verbesserte obere Gabelklemmung

3. Reduzierung der Vibrationen an den Lenkerenden

4. sämtliche Leitungen verbleiben am Motorrad ohne Änderungen

5. Hinweis auf die Vorbereitung um Rammount-Halterungen anzubringen - die sind auf den Bildern zu sehen, gehören aber wohl nicht zum Lieferumfang

Dann der Hinweis auf die Möglichkeit weiteres zukünftiges Zubehör befestigen zu können

1,5 " Lenkerstangen weiter zum Fahrer

Oberfläche ist sandgestrahlt

CNC gefertigt aus vollem Material per Extrusion

Anbauanleitung (englisch) mit Bildern und allem benötigten Montagematerial

1,5 Stunden Anbauzeit

Tour Performance ® HR Triple Clamp for the Yamaha FJR1300A / AE

Super Bike Performance Touring Bike Comfort

Updated for 2008, we introduce the new Tour Performance HRT-2 triple clamp for the 2006/08 FJR 1300

Based on the original HRT design launched in 2006, our new triple clamp now offers two bar mounting options:

- The forward mounting option positions the stock bars 1/2" higher and 1 1/4" back while rotating the grip angle 1 degree forward for a comfortable yet sporty feel.

- The rear mounting option positions the bars 1/2" taller and 1 3/4" closer to the rider for the greatest comfort possible.

- Re-positions the handgrips and controls closer to the rider for greatly improved long distance riding.

- Greatly increased fork rigidity from thicker cross section design. Tighter steering stem- to - bore clearance, and dual 8mm fork tube pinch bolts.

- Reduced vibrations felt in the hand grips.

- All stock hydraulic lines, cables and control housing wire looms are retained and provide proper slack when bars are moved from full left to right stops.

- Two threaded holes located behind the ignition switch are provided to mount one or two ram ball mounts. Additional design provisions have been engineered into the HRT Triple Clamp design for future accessory mounting.

This is one of the most comprehensive and complete designs HeliBars has ever offered. You can enjoy performance and comfort!

•Rear Offset Handlebar Mount

•Satin Finish

•CNC Machined from Solid 6061 T6 Extrusion

•Instructions with Photos and all Hardware Included

•1 1/2 hour installation time

Note: The use of our original accessory riser is not recommended for use with the new HRT-2 due to hydraulic line / cable limitations.

2004-2008

HeliBars® Yamaha YZF R1 Handlebar Riser:

Kit includes 54mm fork tube clamp required for installation.

1 5/8" Taller

1" Rearward

3/4" Wider

Retains:

stock cables and hydraulic lines

PLEASE NOTE:

If you have a YZF R1 LE, please specify that model. The LE model requires a 50MM Fork Tube Clamp, which we will supply with your order

1 5/8" Taller

1" Rearward

3/4" Wider

Retains:

stock cables and hydraulic lines

1998-2001

1 5/8" Taller

1/2" Rearward

3/4" Wider

Retains:

stock cables and hydraulic lines

Shown: HeliBars left side of the photo, Stock bar on the right side of photo.

The Tour Performance ® Bar Adapters by HeliBars install beneath your stock bars and raise them 1" (25mm.) By offsetting the bar remount location back, out and rotating the bolt pattern, the hand grips are repositioned 1 3/4" closer to the rider. All stock cables and hydraulic lines are retained. Includes all hardware necessary for installation.

Machined Aluminum