1-3/4" taller
1" wider
Retains: stock cables, hydraulic lines & bar end weights

Black Powdercoat

These Heli BarTM Handlebar Adapters are a direct replacement of the stock handlebars, and retain all stock cables and hydraulic lines. They will be 2" taller, 3/4" more rearward and 2" wider.

Mirror Black Powdercoat

1-3/4" taller
1" wider
Retains: stock cables, hydraulic lines & bar end weights

Black Powdercoat

The Futura Heli BarTM Handlebar Adapters are a direct replacement of the stock bars, retaining all stock cables and hydraulic lines. They will be 1 3/4" taller and 1" more rearward than the stock position.

Black Powdercoat

32mm (1 1/4") Taller
12mm (1/2") Rearset
35mm (1 1/2") Wider

2006-2007

Ken is a motorcyclist residing in Maine and he took delivery of the first K1200 GT in the state After several rides Ken came to the realization that his upcoming 2 month tour of the Rockies would require a change in ergonomics. “I need to get the bars closer to be really comfortable. My reach is a bit short.”

The 'Tour Performance® Top Triple Clamp' by Heli replaces your factory clamp, retaining your stock handlebars, hydraulic lines and cables. The new bar position will be 1" taller & 1 1/2" more rearward than stock.

Machined Aluminum

Titanium hardware also available.

1 1/2" Taller
1/2" Rearward
3/8" Wider
Silver Powder Coat
Retains all stock cables and hydraulic lines

Includes:
2 Aluminum CNC Machined 53mm Adapters
Designed exclusively for the ST2 & ST4
Black Plastic Covers (not shown)

1" Taller
2" Rearset
Includes longer brake line
Silver Powder Coat
Adjustable forward/back

1999:
1 7/8" Taller
2 1/2" Wider
Silver Powder Coat
Retains Stock Cables & Hydraulic Lines

2000-2002:
1 1/2" Taller
2 1/2" Wider
Retains Stock Cables & Hydraulic Lines

2 1/2" Taller
2" Rearward
1 1/2" Wider
Silver Powder Coat
Retains Stock Cables & Hydraulic Lines

New for 2006, CBR1000RR clip-on Heli Bars^TM. Superbike performance with improved ergonomics = Super Sport Tourer.

1 3/4" taller
1" rearward
27" width
Includes longer galfer front brake lines
Black Powder Coat

1 1/4" taller 1" rearward
1 1/2" wider
Retains:
stock cables, hydraulic lines & bar end weights
Black Finish available

1 5/8" Taller
7/8" Rearward
1 1/2" Wider Overall

All of your stock cables and hydraulic lines will work with the Heli BarTM Handlebar Adapters. Our newest design feature allows your factory internal damper to be reinstalled, greatly reducing vibration. Available in a Mirror Black Powder Coat.

Up to 3" taller and 3" more rearward
Wrist angle adjustable
Telescopic
Available in Black Powder Coat only
Investment cast chrome-moly clamping lugs for higher strength and lighter weight
Sleeker profile lugs
Improved Overall Appearance

1-1/4" taller
1-1/2" rearward
2" wider
1/4 lb. lighter than stock
Retains:
stock cables, hydraulic lines & bar end weights
Black powder coat finish

Up to 3" taller and 3" more rearward
Wrist angle adjustable
Telescopic
Available in Black Powder Coat only
Investment cast chrome-moly clamping lugs for higher strength and lighter weight
Sleeker profile lugs
Improved Overall Appearance

1 5/8" Taller
1" Rearward
1 1/2" Wider (27")
Over 3oz lighter than stk
Silver Powder Coat
Direct Replacement

1 1/8" Taller
1/2" Rearward
1/2" Wider
Retains all stock cables and hydraulic lines

1 1/8" Taller, 1 1/2" Rear Set
Stock Cables / Hydraulic Lines are retained
Stock Angle is retained
Levers adjust lower than stock for increased comfort
Manufactured from DOM Steel Tubing
Durable Silver Powdercoat Finish
Same Weight as Stock Bars

1 1/4" taller
1 1/2" rearward

Retains:
Stock Cables, Hydraulic Lines and Bar Ends
Silver Powder Coat

1-3/4" taller
1" wider than stock position
5 ozs. lighter than stock
Retains:
stock cables, hydraulic lines & bar end weights
Black powder coat finish

1 1/2" taller
1 1/2" rearward
2" wider"
1/4 lb lighter
Longer throttle cable included
Black Powder Coat

STANDARD COVER

Heli Modified originally designed and released the ST1300 Tour Performance® Bar Relocation Adapters in the spring of 2003. As it is customary for us to re-evaluate our design after one or two seasons, we have found several areas to make improvements to an already excellent design...

1" taller
2" rearward
Improved Angles

Retains:
Stock Handlebars, Cables, and Hydraulic Lines

OPTIONAL COVER

Optional threaded mounting hole for ram mount.

1" taller
2" rearward
Improved Angles

Retains:
Stock Handlebars, Cables, and Hydraulic Lines

2005-2006 - POLICE VERSION
1" taller
2 1/2 " rearward
Improved Angles

Retains:
Stock Handlebars, Cables, and Hydraulic Lines

CNC aluminum adapters are installed in place of the stock clip-ons, allowing installation of the Multi-Tour Sport Heli BarTM Handlebar Adapters. Handlebars adjust up to 2" taller and 1 1/2" more rearward than stock position, dramatically improving comfort. Telescopic for a wide range of angle changes. Longer brake lines required and included in kit. Bar end weights are retained.

CNC aluminum adapters are installed in place of the stock clip-ons, allowing installation of the Multi-Tour Sport Heli Bars. Handlebars adjust up to 3" more rearward than stock position, dramatically improving comfort. Telescopic for a wide range of angle changes. Stock cables, hydraulic lines and bar end weights are retained (only the 1986 Concours requires a longer brake hydraulic line).

1 1/2" Taller
1/2" More Rearward
1/2" Wider Overall

Retains stock cables, hydraulic lines

1 1/2" Taller
1/2" More Rearward
1/2" Wider Overall

Retains stock cables and hydraulic lines.

2 1/4" Taller
5/8" More Rearward
5/8" Wider Overall

(3/4" taller, 1/8" more rearward, and 1/8" wider overall than original design)

Kit includes longer clutch cable, all other stock lines retained

0-4" taller
0-4" more rearward
Longer brake hydraulic line included

Tour Performance Bar Relocator Riser Block

20 mm (3/4”) taller
10mm (3/8) rear offset

CNC Machined from solid Billet Aluminum
Black anodized finish
Hardware is supplied
10 minutes installation

The cut-outs in the forward sides of the fuel tank / air filter cover and the "wind cheating" fairing left little room for a taller and more offset Heli Bar, so we did the next best thing. We raised the factory bars with our Tour Performance handlebar riser.

1 3/4" Taller
1" Rearward
2" Wider
Retains:
Stock Cables and Hydraulic Lines
Silver Powder Coat

2-3" Taller
0-2" Rearward
Adjustable Wrist Angle
Kit includes longer front
Brake hydraulic line by Galfer

1 3/4" Taller
1" Rearward
2" Wider
Retains:
Stock Cables and Hydraulic Lines
Silver Powder Coat

1 1/2" Taller
1" Rearward

1 5/8" Taller
1/2" Rearward
1/2" Wider Overall
Stock cables, hydraulic lines & bar end weights retained

2" Taller
up to 1" Rearward

All stock cables and hydraulic lines are retained, and bar end weights are accepted.
Available in a Silver Power Coat.

Shown: Heli on left side of photo, stock on right

GSXR 750 - 2000-2003
GSXR 1000 - 2000-2004

1 1/2" Taller
1" Rearward
1.5" Wider (26" vs. 24.5")
Flatter, more comfortable angles
Replaceable bar -
trick looking & very functional
Retains all stock cables and hyd. lines

Brand new for 2006, Heli Modified is pleased to offer its newest set of Heli BarsTM for the GSXR 1000.

1 1/2" taller
5/8" more rearward
Maintains stock width

Up to 2" taller and 1-1/2" more rearward
Two-Part Design:
CNC billet adapters which accept our multi adjustable design handlebars
Retains stock cables, etc.
Silver powdercoat

Does not work with factory heated grips,
Does work with Hot Grips®.

1 7/8" Taller
1 3/4" Rearward
Direct Replacement
Silver Powder Coat

1 7/8" Taller
1 3/4" Rearward
Direct Replacement
Silver Powder Coat

Up to 2" taller and 1-1/2" more rearward
Two-Part Design:
CNC billet adapters which accept our multi adjustable design handlebars
Retains stock cables, etc.
Silver powdercoat

Does not work with factory heated grips,
Does work with Hot Grips®.

The Tour Performance® Bar Adapters by Heli install beneath your stock bars and raise them 1" (25mm.) By offsetting the bar remount location back, out and rotating the bolt pattern, the hand grips are repositioned 1 3/4" closer to the rider. All stock cables and hydraulic lines are retained. Includes all hardware necessary for installation.

Machined Aluminum

2006-2007

Super Bike Performance – Touring Bike Comfort™”

1. 38mm (1 ½”) rear offset handlebar mounts re-positions the handgrips and controls 1 ½” closer to the rider for greatly improved long distance riding. Stock height has been maintained for a comfortable yet sporty feel.
2. Greatly increased fork rigidity from thicker cross section design. Tighter steering stem- to - bore clearance, and dual 8mm fork tube pinch bolts.
3. Reduced vibrations felt in the hand grips.
4. All stock hydraulic lines, cables and control housing wire looms are retained and provide proper slack when bars are moved from full left to right stops.
5. Two threaded holes located behind the ignition switch are provided to mount one or two ram ball mounts. Additional design provisions have been engineered into the HR Triple Clamp design for future accessory mounting.

This is one of the most comprehensive and complete designs Heli Bars has ever offered. You can enjoy performance and comfort!

1 ½” Rear Offset Handlebar Mount

Sand-cast Finish

CNC Machined from Solid 6061 T6 Extrusion

Instructions with Photos and all Hardware Included
1 ½ hour installation time

Kit includes 54mm fork tube clamp required for installation.

1 5/8" Taller
1" Rearward
3/4" Wider
Retains:
stock cables and hydraulic lines

Kit includes 54mm fork tube clamp required for installation.

1 5/8" Taller
1" Rearward
3/4" Wider
Retains:
stock cables and hydraulic lines

YZF600 (97-04 fits US model only)

1 1/2" Taller
1/2" Rearward
1/2" Wider...

1998-2003

1 5/8" Taller
1" Rearward
3/4" Wider
Retains:
stock cables and hydraulic lines [further details on product page]

Ram mount ball that fits the "optional" cover for the 03-05 Honda ST1300, 2006-2007 BMW K1200 GT, and 2006 Yamaha FJR1300.